CoVACIEL-ESP32

[rgot-org]

Arduino libraries for CoVACIEL ESP32 project

[github-actions]

❌ ERROR: Arduino Lint found errors with https://github.com/rgot-org/CoVACIEL-ESP32:

Linting library in CoVACIEL-ESP32
WARNING: A commonly misspelled word was found in the library.properties sentence field. Suggested correction: Gestion   
         des actionneurs (propulsion et direction), des captures (TOF ou lidar) et du BUS CAN pour le projet CoVACIEL   
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format         
         (Rule LP033)                                                                                                   
ERROR: library.properties url value is less than minimum length.                                             
       See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
       (Rule LP056)                                                                                          
WARNING: library.properties url field value  does not have a valid URL format.                                 
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP041)                                                                                          
WARNING: Unable to load the library.properties url field: Head "": unsupported protocol scheme ""              
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP042)                                                                                          
WARNING: library.properties depends field item(s) ESP32-TWAIN-CAN not found in the Library Manager index.      
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
         (Rule LP048)                                                                                          
WARNING: Incorrect Arduino.h filename case in #include directive: CoVACIEL-ESP32/src/CoVACIEL_CAN.h:5: #include         
         "arduino.h" (Rule LC001)                                                                                       
WARNING: No license file found.                                                                                                                 
         See:                                                                                                                                   
         https://docs.github.com/repositories/managing-your-repositorys-settings-and-features/customizing-your-repository/licensing-a-repository
         (Rule LD002)                                                                                                                           
WARNING: No example sketches found. Please provide examples.                                      
         See: https://arduino.github.io/arduino-cli/latest/library-specification/#library-examples
         (Rule LD004)                                                                             

Linter results for project: 1 ERRORS, 7 WARNINGS

-------------------

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @rgot-org
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[per1234]

Hello . Thanks for your interest in contributing to the Arduino Library Manager.

I see the bot reported a problem with your submission that will block its acceptance:

ERROR: library.properties url value is less than minimum length.                                             
       See: https://arduino.github.io/arduino-cli/latest/library-specification/#libraryproperties-file-format
       (Rule LP056)                                                                                          

Please fix the problem so we can proceed with your submission.

You will need to do the following things:

1. Set the value of the url property in the library's library.properties metadata file to a URL where users can get more information about the library (the GitHub repository is a good choice if there isn't a dedicated documentation page for the library).
2. Bump the value of the version property in the library's library.properties metadata file.
3. Create a new release or tag in the library repository.
4. Add a comment here in the pull request thread that mentions @ArduinoBot.

After that, the automated checks will run again. Once those are passing, your library will be automatically added to Library Manager.

If you have any questions or concerns, please let me know.

Regards, Per

[per1234]

For the sake of a tidy repository, I'm going to close this due to lack of activity.

@rgot-org if you ever resolve the issues reported by the bot, please submit another pull request to add the library.

I'll continue to monitor this thread, so feel free to let me know if you have any questions or concerns.