lld test failures in release/18.x branch on MacOS

[tstellar]

There are some lld tests that are failing on the release/18.x branch:

lld :: ELF/build-id.s
lld :: ELF/partition-notes.s

It looks like something has changed the way that the build-ids are being calculated. I'm unable to bisect, because when I re-test commits that used to pass, they now fail.

Full build logs are here: https://github.com/tstellar/llvm-project/actions/runs/7923959063/job/21634702772
Attached are some of the binary files produced by the failing tests.
lld-artifacts.zip

cc @MaskRay

[llvmbot]

@llvm/issue-subscribers-lld-elf

Author: Tom Stellard (tstellar)

There are some lld tests that are failing on the release/18.x branch:

lld :: ELF/build-id.s
lld :: ELF/partition-notes.s

It looks like something has changed the way that the build-ids are being calculated. I'm unable to bisect, because when I re-test commits that used to pass, they now fail.

Full build logs are here: https://github.com/tstellar/llvm-project/actions/runs/7923959063/job/21634702772
Attached are some of the binary files produced by the failing tests.
lld-artifacts.zip

cc @MaskRay

[MaskRay]

tl;dr I suspect that llvm/lib/Support/BLAKE3 has a different result on the macOS-13 build bot, which is puzzling.
All the other machines seem to agree on the BLAKE3 result. The two tests also pass on a macOS 11 arm64 machine.

---

The two tests compute a build ID and compare the output with a golden value.

+ /Users/runner/work/llvm-project/llvm-project/build/bin/FileCheck --check-prefix=SEPARATE /Users/runner/work/llvm-project/llvm-project/lld/test/ELF/build-id.s
/Users/runner/work/llvm-project/llvm-project/lld/test/ELF/build-id.s:92:18: error: SEPARATE-NEXT: expected string not found in input
# SEPARATE-NEXT: 0x002001a8 5cd067a4 2631c0fd 42029037 4b8e0938
                 ^
<stdin>:2:47: note: scanning from here
0x00200198 04000000 14000000 03000000 474e5500 ............GNU.
                                              ^
<stdin>:3:1: note: possible intended match here
0x002001a8 07d4c770 93d79b3c 9f4e6f32 f49aef73 ...p...<.No2...s
^

This failure indicates that the linker output LLD_IN_TEST=1 LLD_VERSION='LLD 1.0' ld.lld --build-id=sha1 -z separate-loadable-segments build-id.s.tmp -o build-id.s.tmp2
on the macOS-13 build bot has different .note.gnu.build-id content.
If I compare the correct output with the artifact in lld-artifacts.zip, I get:

% cmp -l a2 /tmp/c/build-id.s.tmp2  # a2 is the correct build-id.s.tmp2
 425 134   7
 426 320 324
 427 147 307
 428 244 160
 429  46 223
 430  61 327
 431 300 233
 432 375  74
 433 102 237
 434   2 116
 435 220 157
 436  67  62
 437 113 364
 438 216 232
 439  11 357
 440  70 163
 441  50 176
 442 251  17
 443 326  36
 444 363 247

Only 20 bytes (the build ID) are different. All the other bytes are equal. ld.lld --build-id=sha1 uses truncated BLAKE3 instead of SHA1, so this suggests that BLAKE3::hash<20>(arr).data() has a different result on the macOS-13 bot.

On a macOS 11 arm64 machine, the BLAKE3 result matches the value observed on Linux machines.

% sw_vers
ProductName:    macOS
ProductVersion: 11.0.1
BuildVersion:   20B29
% ls ./lib/Support/BLAKE3/CMakeFiles/LLVMSupportBlake3.dir/blake3_neon.c.o  # present

[MaskRay]

@tstellar CFLAGS/CXXFLAGS -DBLAKE3_USE_NEON=0 should disable the neon implementation of BLAKE3. Does it fix the two lld --build-id tests?

If -DBLAKE3_USE_NEON=0 does make the tests pass, the possibilities will be:

• Some neon instructions are broken on the macOS 13 build bot
• llvm/lib/Support/BLAKE3/blake3_neon.c contains a bug.

Cc @akyrtzi who added BLAKE3.

[tstellar]

@MaskRay The macos-13 builders are x86, will that option have any effect there?

[MaskRay]

@MaskRay The macos-13 builders are x86, will that option have any effect there?

OK. Then perhaps check which SIMD implementation the macos-13 builder uses and macros BLAKE3_NO_SSE41/BLAKE3_NO_AVX2/BLAKE3_NO_AVX512 can be useful.

[tstellar]

I ran a test on every version of macOS available:
macos-11 (x86), macos-12 (x86), and macos-14(M1) all pass and only macos-13 (x86) fails.

I did another test with -DLLVM_DISABLE_ASSEMBLY_FILES=ON and this fixes the tests on macos-13, but it causes the Linux build to fail.

It seems like it could be a bug in the assembler on macos-13? I can try to get the object files to compare between the different version of macOS.